FAQs
1. Switching on/off and charging iTriangle online
The iTriangle online unit has an integrated battery. Switch the unit on by plugging in the cable as shown in the picture below. The red LED will light up when the iTriangle online unit is powered.
Recharge the battery by connecting the battery as shown above and plugging the unit into the charger via the micro USB connector as shown below.
Note: downloading new programs onto the iTriangle online unit may not be possible if the battery is not sufficiently or fully charged.
2. How to work with the construction kit – basics
3. Server code.itriangle.cz doesn't work properly
Restart and clear your internet browser's cache (some tips on how to do this can be found here).
4. Programs cannot be downloaded to the iTriangle online unit
Make sure your iTriangle online unit is switched on (red LED is on) and connected to WiFi (blue LED is blinking slowly – "breathing"). If both LEDs are operating correctly, try recharging the battery. If the battery is insufficiently or not fully charged, communication between the iTriangle online unit and code.itriangle.cz may not work properly.
Žádné komentáře